Skip to main content
  >  
Headphones & Headsets   >  Headphones   >  Sony   >  Sony MDR ZX110AP Wired Headset with In-line remote and mic for hands-free calls, Black
Flat Rs.100 off on UPI Payment
Sony MDR ZX110AP Wired Headset with In line remote and mic for hands free calls, Black
Sony MDR ZX110AP Wired Headset with In line remote and mic for hands free calls, Black
Sony MDR ZX110AP Wired Headset with In line remote and mic for hands free calls, Black
Sony MDR ZX110AP Wired Headset with In line remote and mic for hands free calls, Black
View Slideshow
PDF
User Manual

Sony MDR ZX110AP Wired Headset with In-line remote and mic for hands-free calls, Black(491072967)

(1 Ratings)
Print

Gain more with offers (1)

Save more with EMI/Cashback  Read-T&C

    Warranty

    • Warranty: 1 Year manufacturer warranty

    Key Features

    • Swivel folding design makes travel easy
    • In-line remote and mic for hands-free calls
    • Enfolding closed-back design seals in sound
      • See More 
    Return Policy
    • For return eligibility. Read-T&C
    • All accessories, product & packaging need to be returned in original condition.
    Got Feedback to share on this page? report here.
    • Offer Price:  ₹1,299.00
    • MRP: ₹1,690.00  (Inclusive of all taxes)
      • You Save: 23%(₹391)
    • FREE Shipping!
    • Description
    • Specifications
    • Support
    • FAQs
    • Customer Reviews
    Neodymium dynamic drivers deliver precise sound
    Lightweight 30 mm neodymium dynamic driver units enable the headphones to deliver a punchy, rhythmic response to even the most demanding track. Combined with a highly sensitive diaphragm, you'll be able to turn the headphones up louder-without the need for an amp-and still enjoy clear, precise audio across the spectrum.

    Swivel folding design makes travel easy
    Take these headphones anywhere you go. The headphones’ swivelling earcup design enables easy storage when you’re not using them, and enhances portability when you’re travelling. The earcups swivel flat, so you can pack them into a suitcase or a bag without worrying about them taking up too much valuable space.

    In-line remote and mic for hands-free calls
    With an in-line remote and built-in microphone on the headphone cord, you can take hands-free calls from selected smartphones while listening to music. Switch easily between songs and calls with no need to remove your headphones. Only featured with the MDR-ZX110AP model.

    Wide frequency range for clear highs and lows
    The wideband frequency range-spanning 12 Hz to 22 kHz-delivers deep bass, rich mid-levels and soaring highs. Hear the detail in every track and stay in-tune with all your music.

    Enfolding closed-back design seals in sound
    The closed-back, enfolding design wraps around the ear, helping to seal in music and keep distractions out. Acoustics are reflected back towards your ears, so you hear even the subtlest of sounds. You'll also feel every beat, as the closed-back design helps to maximise the bass signatures in your music.

    Cushioned earpads for total comfort
    Listen in total comfort. These headphones have a self-adjusting headband and soft cushioned earcups that cover the whole ear. Enjoy the long-lasting comfort you need for listening to your favourite albums back-to-back.

    Specifications (Sony MDR ZX110AP Wired Headset with In-line r...)

    General Information
      Series
      MDR
      Model
      ZX110AP
      Recommended for Bass
      Yes
      Secure fit
      Yes
      Brand
      Sony
    Headset Connectivity
      Form Factor
      Over-the-Ear
    Headset Audio Related
      Impedance
      24 ohm
      Sensitivity
      98 dB
      Response bandwidth
      12 Hz - 22 000 Hz
      Speaker Driver Unit
      30 mm
      Microphone Type
      Built-in
    Headset Controls
      In-line Controls
      Yes
    Physical Dimensions
      Weight
      120 g
      Colour
      Black
      Adjustable Headband/Neckband
      Yes
    Additional Features
      Features
    • 12 Hz-22kHz frequency range, Omni-Direction
    • Gold-plated L-shaped stereo mini Plug
    • Wide frequency range for clear highs and lows
    • Cushioned earpads for total comfort
    In The Box & Warranty
      In The Box
      Operating instructions
      Warranty
      1 Year
    Manufacturing & Packing Information
      Customer care address
      Reliance Digital, Reliance Retail Limited, 3rd Floor, Court House, Lokmanya Tilak Marg, Dhobi Talao, Mumbai-400 002, Maharashtra, India.
      Customer care Phone
      1800-889-1055
      Customer care email
      reliancedigital@ril.com
      Country of origin
      China
      Name and address of Packer
      Sony India Pvt LtdA-18, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi-110044 , Toll Free : 1800-103-7799 , Email : sonyindia.care@sony.com
      Name and address of Manufacturer
      Sony Global Treasury Services Plc., Sony Interactive Entertainment Europe Ltd , 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan
      Name and address of Importer
      Sony India Pvt. Ltd.|| A-18, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi-110044
      Name of Seller
      Reliance Retail Ltd.
      Month and Year of Commodity First Manufactured/Imported/Packed
      January' 2013
      Commodity name
      Headphone
      Item Width
      18 cm
      Item Height
      22.5 cm
      Item Length
      8.1 cm
      Net Quantity
      1 N
      Net Weight
      212 g
      Name and address of Marketed By
      Sony India Pvt LtdA-18, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi-110044 , Toll Free : 1800-103-7799 , Email : sonyindia.care@sony.com

    Support (Sony MDR ZX110AP Wired Headset with In-line r...)

    If no sound is heard

  • Make sure that the headphone plug is properly connected to the device.

    • NOTE: It is possible that the headphone plug has not been inserted properly due to some rigidness of the headphone jack on the device used (music player, smartphone, tablet, etc.). Make sure the plug is completely inserted into the device. In cases when sound cannot be heard from the right channel of the headphones, check if the device the headphones are connected to is equipped with a monaural output. If the device cannot play stereo sound, the headphones will not replicate stereo sound. This is due to the specification of the device and is not a failure. Test this by connecting the headphones to a device equipped with a stereo output (e.g. digital music player) and check if sound can be heard from both channels.

  • Check if the playback device is functioning.

    • NOTE: This can be checked by turning up the volume of the playback device or by connecting a different pair of headphones to the playback device.

    Noises can be heard

  • Connect a different pair of headphones to the device and check if noises are being generated.
  • Check if noises can be heard in a state where the cable is not in contact with clothing, etc.

    • NOTE: There are cases when noise from the cable brushing against clothes can be heard through the cable. This noise may be reduced by using a clip for the cable.

  • When noises can be heard when the headphones are connected to a monitor or mixer equipped with a headphone terminal, it is possible that the monitor or the mixer is the source of the noise. Check if noises can still be heard when connecting a different pair of headphones to the device, or if noises can be heard when connecting the headphones to a different source of sound.
  • In cases when crackling or popping sounds can be heard when mounting canal-type headphones on the ears, this is not a failure. Such sounds may be created due to the earbuds not being stable immediately after they are mounted. Continue use as these sounds will go away after a while.
  • Depending on the device the headphones are connected to, the sound may become distorted or cracked, or noise may be generated when the volume is turned up. In such case, use the headphones with the volume turned down.

    • WARNING: There is a risk of personal injury. Prolonged use under large volumes that stimulate the ears may have adverse effects on hearing. Be careful not to turn the volume up too high to prevent damaging your ears. In addition, volumes that are too high will cause the sound to leak outside from the headphones. Please be careful as this may bother the people around you.

    Interrupted sound

  • Connect a different pair of headphones to the playback device and check if the song, etc. being played by the playback device is still being interrupted.
  • Check if the remaining battery level of the playback device is sufficient.

    • NOTE: Sound may be interrupted when the remaining level of the dry cell batteries or built-in battery is low.

    Make sure that the headphone plug is properly connected to the device.

    NOTE: It is possible that the headphone plug has not been inserted properly due to some rigidness of the headphone jack on the device used (music player, smartphone, tablet, etc.). Make sure the plug is completely and properly inserted into the device.

    Low volume

  • Turn the volume up if the volume of the playback device is too low.
  • Check if the remaining battery level of the playback device is sufficient.
  • Sound may be interrupted when the remaining level of the dry cell batteries or built-in battery is low.

    • Distortion when increasing volume

  • Depending on the device the headphones are connected to, the sound may become distorted or cracked, or noise may be generated when the volume is turned up. In such case, use the headphones with the volume turned down.

    • WARNING: There is a risk of personal injury. Prolonged use under large volumes that stimulate the ears may have adverse effects on hearing. Be careful not to turn the volume up too high to prevent damaging your ears.

    In addition, volumes that are too high will cause the sound to leak outside from the headphones. Please be careful as this may bother the people around you.

    No bass

  • Turn the volume up if the volume of the playback device is too low.

    • Damage

  • If none of the solutions described above solve the issue, it is highly likely that your product has been damaged and needs to be repaired or replaced. To avoid any damage to your product please look at the maintenance section (Anchor) in order to correctly maintain your Sony product.

    • Maintenance

    Cleaning

  • If the headphone plug is dirty, clean the plug using a dry cloth.
  • Check if there are any foreign objects or dirt (such as ear wax or dust) attached to the portion [A] of the headphones. Since this portion produces the sound, foreign objects may cause decreased volumes or deterioration of sound quality.

    • NOTE:

  • When a dirty foreign object is attached, clean the headphones by blowing the foreign object away using an air blower.
  • Refrain from using a sharp object such as the tip of a pen. It might cause additional damage.
  • In cases when the headphones tend to easily slip off from the ears, replace the size of each earbud to one that sits snug in each ear to improve the fit of the headphones.
  • Replace the earbuds or earpads if they have become damaged or deteriorated.

    • Handling

  • Be sure to hold the plug portion to pull when disconnecting the headphones from the playback device.

    • NOTE: Pulling on the cable portion may cause failures such as ruptured wires.

  • Don't tightly wrap the cable of the headphone around a playback device, etc. This is because tightly wrapping the cable will apply stress on the wires inside the cable and may rupture the wires, resulting in sound deterioration or complete lack of sound.

  • Precautions regarding Static Electricity.
    Static electricity stored inside the human body may cause tingling pains inside the ear. This can be reduced by wearing clothes made of natural materials.

    • FAQs (Sony MDR ZX110AP Wired Headset with In-line r...)

    How to find your model name?
    Your model name enables you to get information and services specific to your device. The model name and serial number can be found in several locations, depending on the product:<li>A label on the back or bottom of the device</li><li>The original packaging and printed instruction manual inside it</li><li>The system menu in products with a user interface (e.g. TVs or cameras)</li>
    What is One-touch function?
    The One-touch function by Sony incorporates Near Field Communication (NFC) technology. By using Sony devices with the One-touch function, users can easily and instantly register and pair their Bluetooth devices to play music and more without the need for any set-up. The One-touch function is a reference to this instant connection between devices, and the One-touch listening is a reference to the music playback feature made possible across an array of one-touch enabled devices.One-touch listening:With One-touch listening, you just have to touch your smartphone or tablet for a couple of seconds on the listening device through which you want to play music, or stream other audio content. Listening devices can, for example, be wireless speakers or wireless headphones. The devices connect automatically.One-touch listening uses NFC and Bluetooth to connect and stream music, so your smartphone, tablet and the listening device (speakers or headphones, etc.) must support NFC and Bluetooth.With one-touch listening, you can listen to content from, for example, the WALKMAN player, the YouTube app, Internet-radio apps such as TuneIn Radio, or audio book apps.

    Customer Reviews  

    (Sony MDR ZX110AP Wired Headset with In-line remote and mic for hands-free calls, Black)
    5/5 (1 Ratings)
    0
    0
    0
    0
    0
    (Read-T&C)
    Pratik Dhoke Certified Buyer
    TUMSAR, 4/1/2024
    5 people found this helpful