What should I do if the microwave turntable does not work ?

If the microwave spinner does not rotate, the food can heat unevenly. Please read the guide below to fix this.

If you have installed it for the first time

Remove all the packing materials inside the microwave oven. Install the roller ring and turntable. Check that the turntable rotates freely.

Note: Do not operate the microwave oven without the roller ring and turntable.

The turntable rattles while turning and is noisy

Food particles or other materials that are on the rollers or on the bottom of the microwave can also result in an unbalanced and noisy turntable.

Step 1. Remove the turntable and roller wheel and clean them with warm, soapy water.

Step 2. Clean the bottom of the microwave and roller track.

Step 3. Dry all the parts thoroughly and reassemble.

Step 4. Verify that the center of the turntable has a coupler that connects to the motor. If this is not positioned correctly, the turntable will not spin, and it will usually make a lot of noise.

While turning, the turntable comes out of place or stops turning

The turntable drags while turning

How to clean Samsung Microwave Oven?

regularly to prevent impurities from building up on or inside the oven. Use a soft cloth in soapy water to clean both inner and outer sides of the oven. Rinse and dry well.

1. Put a cup of diluted lemon juice on the center of turntable.
2. Heat the oven for 10 minutes at max power.
3. When the cycle is complete, wait until oven cools down. Then, open the door and clean cooking chamber.

CAUTION :

How to check Error code on Microwave display ?

Causes of error :

Steps to resolve the above errors:

1. Press STOP button.
2. Disconnect the power cord and then reconnect it after 3 seconds.