Philips AC1217/20 Air purifier, removes 99.97 per cent airborne pollutants with 4-stage filtration

Purifies the air in less than 12 mins

With just one push of a button, the air purifier filters the invisible viruses, allergens or pollutants in your home, to keep it clean and safe. It purifies quickly and effectively, thanks to its clean air delivery rate (CADR) of 260 cu. m/h.

Purifies the air in less than 12 mins

99.9% virus, allergen and pollutant removal

Purifies rooms up to 29 sq. m

260 cu. m/h clean air rate (CADR)

HEPA and Active Carbon filter

Fast purification suitable for rooms of up to 29 sq. m

Powerful airflow circulation effectively covers rooms up to 29 sq. m and distributes clean air in every corner of the room. This boosts performance to 260 cu. m/hr CADR (Clean Air Delivery Rate). It cleans 20 sq. m in less than 12 min.

* This Philips AC1217 20 Air Purifier image is for illustration purpose only. Actual image may vary.

HEPA filter captures 99.97% of particles of 0.003 microns

3-layer filtration with NanoProtect HEPA, Active Carbon and pre-filter captures 99.97% of ultra-fine particles as small as 0.003 microns (4), so you are safe from PM2.5, bacteria, pollen, dust, pet dander and other pollutants. Certified by the European Centre for Allergy Research Foundation.

* This Philips AC1217 20 Air Purifier image is for illustration purpose only. Actual image may vary.

Removes up to 99.9% of viruses and aerosols from the air

Captures aerosols including those which may contain respiratory viruses. Tested independently by airmid health-group to remove up to 99.9% of viruses and aerosols from the air (3). Also tested for coronavirus

* This Philips AC1217 20 Air Purifier image is for illustration purpose only. Actual image may vary.

Smart sensors for intelligent purification

Scans the air 1000x a second to detect ultra fine-particles. Reports the air quality in real time, and intelligently chooses the right speed for your home (in auto mode).

* This Philips AC1217 20 Air Purifier image is for illustration purpose only. Actual image may vary.

Thoroughly tested for quality you can trust

Philips purifiers go through 170 mandatory and strict inspection tests before releasing from factory. They are subjected to rigorous life and durability tests, for continuous operation 24/7.

* This Philips AC1217 20 Air Purifier image is for illustration purpose only. Actual image may vary.

Sleep mode with ultra-quiet operation

In Sleep mode, display lights are dimmed, and the purifier operates in near silence for clean air while you sleep.

* This Philips AC1217 20 Air Purifier image is for illustration purpose only. Actual image may vary.

Air quality display

See the real-time air quality in your home at a glance. The display shows the level of allergens and PM2.5 with an intuitive color ring.

* This Philips AC1217 20 Air Purifier image is for illustration purpose only. Actual image may vary.

Auto mode and 5x manual speed levels

Run your product in intelligent automatic mode or choose from 5x speed levels: Sleep, Speed 1, 2, 3 and Turbo - to be fully in control of the airflow and sound level.

* This Philips AC1217 20 Air Purifier image is for illustration purpose only. Actual image may vary.

 

 Smart light control

Both air quality index and the light on the UI can be dimmed and/or turned off to avoid light disturbance.

Low energy consumption

Thanks to its energy efficient design, the air purifier runs at max. 50 W power. This is equivalent to a standard light bulb.

Smart filter indicator

The air purifier accurately calculates filter lifetime based on pollution level and operation time. It notifies you when filter needs replacement, for easy maintenance.

What does the PM2.5 indicator in my Philips Air Purifier mean?

PM2.5 is a scale for measuring real time air quality. Its values vary from 0 to 500.

The PM2.5 indication is connected to your Philips Purifier’s air quality ring light to inform you in real time about the quality of the ambient air.

The different colors indicate the following:

1. Blue: good.
2. Blue-violet: fair
3. Red-Purple: unhealthy
4. Red: very unhealthy

What filters should I use with my Philips Air Purifier?

When you wonder which filters to use with your Philips Air Purifier, please find here if we can answer your questions

Philips Air Purifier filters

Your Philips Air Purifier comes with multiple filters, and warns you when a filter must be replaced: when one of the filters is almost full and has to be cleaned or replaced, the appropriate filter replacement light starts to flash to prompt you to replace that filter. That is how you know which filter to replace.

Please find here what filter applies to your Philips Air Purifier

Depending on the Air Purifier you have, you might see different types of filter replacement alert lights:

A) Purifiers AC400x, AC401x, AC402x, AC407x, AC408x, ACP073x, ACP077x, ACP007x:

1. Filter replacement light 1
2. Filter replacement light 2
3. Filter replacement light 3/4
4. Filter replacement light 5

See further explanations below.

B) All other purifiers:

Purifiers that do not belong to the list mentioned above, show a filter replacement alert light or an error code (models with a display panel).

See further explanations below.

A) Purifiers AC400x, AC401x, AC402x, AC407x, AC408x, ACP073x, ACP077x, ACP007x:

When filter replacement light 1 flashes (in red)

The pre-filter needs to be cleaned. You can wash it under running tap and dry it completely it before installing it back. Alternatively, you can clean it using a vacuum cleaner.

When the filter replacement light 2 is on or flashing (in red)

When the filter replacement light 2 flashes or is on continuously, you need to replace the multi-care filter (for Air purifier AC4004 only). This filter cannot be washed. After replacement, make sure you reset your appliance

The filter replacement light 3/4 is on (in red)

The filter 3 (activated carbon filter) and filter 4 (HEPA filter) need to be replaced. After replacing them, make sure you reset your purifier. Please note that these filters cannot be washed.

The filter replacement light 5 flashes (in red)

This light indicates that the humidification filter should be replaced.

B) All other purifiers

In this case (and for models without a display screen), your Philips Air Purifier has a filter replacement light. This light will stay on and be red.

If your purifier has a display screen, then it will show one of the following error codes:

Codes A1 to A9:

Replace NanoProtect S3 HEPA filter.

Codes C1 to C9:

Replace the NanoProtect S3 AC filter.

Code: F0

Clean the Pre-filter.

What do the codes on my Philips Air Purifier mean?

Your Philips Air Purifier gives you reassurance by displaying real-time indoor air quality codes. Discover what the codes mean.

Meanings of codes in Philips Air Purifiers

Depending on the Air Purifier model you have, you might find one or more of the following indicators or codes:

1. Code: A
Auto mode
2. Code: C
Gas mode (AC3254 and AC3256 only)
3. Code: L
Child lock on
4. Code: UL
Child lock off
5. Code: F0
Clean the pre-filter
6. Code: A0 to A9
Replace NanoProtect S3 HEPA filter
7. Code C0 to C9:
Replace NanoProtect S3 AC filter
8. Code SL
Sleep Mode
9. Code 1h:
Timer mode
10. Code t:
Turbo Mode.
11. Error Code: Er
The hall sensor is not working properly. Remove and then reattach the front panel. If the error code “Er” still persists, we recommend you to contact us.
12. Error code: E1 to E4
The appliance has malfunctions. In this case, we recommend you to contact us.